Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start the Nissan Qashqai When the Key is Flat?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
Video tutorial

When the remote for the Nissan Qashqai is flat, you will not be able to open the car with the remote or start the engine. However, you can bypass this issue by opening the car door with the emergency key, which is located at the back of the remote.

Then, insert the remote into the ignition barrel; the key ID will not be recognised due to the flat battery, preventing the engine from starting. You can resolve this by placing the remote close to the START/STOP button and pressing the clutch.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Starting the Nissan Qashqai with a Flat Remote Battery
Starting the Nissan Qashqai with a Flat Remote Battery
Nissan Qashqai (2021-2026 / J12) It may happen that the battery powering the remote for the Nissan Qashqai runs out in a location where you cannot obtain a new battery. To access and…
How to Reset the Airbag Light on a Nissan Qashqai
How to Reset the Airbag Light on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you begin, enter the cabin of your Nissan Qashqai, specifically the driver's seat. Start by inserting the key into the ignition barrel and tur…
How to Start a Nissan Qashqai Without the Smart Key
How to Start a Nissan Qashqai Without the Smart Key
Nissan Qashqai (2006-2014 / J10) In this brief tutorial, you will learn how to start your 2007 Nissan Qashqai without the smart key. First, extract the emergency key from the remote …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos