Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Light on a Nissan Qashqai

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Warning light – error code

Before you begin, enter the cabin of your Nissan Qashqai, specifically the driver's seat. Start by inserting the key into the ignition barrel and turning it on and off three times without starting the engine. Then, turn the instrument panel back on and wait for the airbag light to flash ten times, then turn the instrument panel off again. By doing this, when you reactivate the instrument panel, you will have successfully reset the airbag light on a Nissan Qashqai.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2006-2014 / J10) Today's instructions will allow us to reset the airbag malfunction warning light on the Nissan Qashqai in a few simple steps. First, it is necessary …
Nissan Qashqai (2006-2014 / J10) In this video tutorial, you will see how to reset the airbag light on the Nissan Qashqai from 2006 to 2014. First, get into the vehicle and insert th…
Nissan Qashqai (2014-2022 / J11) In this short video tutorial, you will learn how to turn off and reset the airbag light on a Nissan Qashqai second generation; before performing the …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - What does the Nissan Qashqai engine warning light come on? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos