Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to remove water condensation on the front headlights

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Headlight
Operation: How to remove water condensation on the front headlights

Is it possible to remove the condensation inside the front headlights without removing them? Well, the answer is yes! To perform this operation, we must first open the front hood of the car and remove the bulb inside the left front headlight. Once the bulb is removed, insert a plastic tube inside the headlight and connect the tube to a vacuum cleaner. Turn on the vacuum cleaner and extract all the water inside with the cold air jet. When you are satisfied with the operation, reassemble the bulb and move on to the right front headlight.


Posted on 5 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Vari - How do you replace the front headlight of the Kymco Downtown 300? Read Answer
    • Vari - How do you adjust the front light on the Vespa Gts? Read Answer
    • Vari - What is the correct position of a led light? Read Answer
    • Vari - How to replace the headlight bulbs on the Kymco Agility R16 +? Read Answer
    • Vari - How to change the front bulbs of the Piaggio Beverly 250? Read Answer
    • Vari - How to open the car headlight? Read Answer
    • Vari - When does code 21 appear in Opel? Read Answer
    • Vari - What does code 18 mean in the Vauxhall Adam? Read Answer
    • Vari - What to do if the headlight bulb holder retainer no longer holds? Read Answer
    • Vari - What does the "AFS" light on my car mean? Read Answer
    • Vari - How do you disassemble the headlight of a Suzuky Gsr 600? Read Answer
    • Vari - Position light replacement: how much does it cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos