Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Solve the Condensation Problem Inside the Car Headlight

Model: (Various brands) Various
Part: Headlight

Video tutorial

In this video tutorial, you can see how to solve the condensation problem inside your car's headlight. When this problem occurs, the likely cause is that it is not properly sealed at the back.

This type of issue is quite serious as the headlight cannot provide good illumination, and you risk getting fined for poor lighting; moreover, there should not be any water in the headlights as there are electrical components that could be damaged and corrosion may form.

The first step is to disassemble the entire headlight, open the caps, and dry the inside of the headlight with a hairdryer; once the inside is thoroughly dried, ensure the covers are properly fitted to prevent water ingress, then check the seals and apply silicone grease if necessary.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

The Reason Why Condensation Forms in Headlamps; What to Know When Buying a Used Car
The Reason Why Condensation Forms in Headlamps; What to Know When Buying a Used Car
(Various brands) Various In this video, you can discover why older vehicles often develop condensation inside the headlamp, especially in the front one. It is very unlikely t…
How to Remove Water Condensation from Front Headlights
How to Remove Water Condensation from Front Headlights
(Various brands) Various Can you remove water condensation from inside the front headlights without taking them out? The answer is yes! To perform this operation, first open …
How can moisture buildup in the car headlight be eliminated?
How can moisture buildup in the car headlight be eliminated?
(Various brands) Various The creation of humidity in the front headlights of the car could, immediately or over time, reduce the effectiveness of the light emitted by the opt…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos