Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : Use the bandage to repair the mufflers.

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Muffler
Operation: Use the bandage to repair the mufflers.

In this video tutorial you can see how the muffler repair bandage is used. Before repairing the muffler we must make a premise on the muffler that must be repaired, as if the conditions of the muffler are good (if the hole in question is not too large and only if the exhaust terminal (i.e. the muffler) it is kept in good condition) it will be possible to repair the muffler otherwise it is not possible. If you want to repair your muffler with the bandage you have to brush, sand and carefully clean the tailpipe. Then apply the muffler bandage to the crack or hole to be repaired. Once this is done, you have to start the car engine for at least fifteen minutes. The muffler overheats due to the passage of exhaust gases, this heat causes the resins of the adhesive bandage to adhere to the muffler itself, sealing them and repairing the crack or hole.


Posted on 15 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Vari - How much does it cost to change a muffler on a car? Read Answer
    • Vari - What does the Volkswagen catalytic converter light mean? Read Answer
    • Vari - How to tell if the car's muffler is broken? Read Answer
    • Vari - What is the cost to change the muffler? Read Answer
    • Vari - How much does it cost to replace the muffler? Read Answer
    • Vari - How much does the putty repair mufflers cost? Read Answer
    • Vari - How much does it cost to replace the muffler? Read Answer
    • Vari - How much does it cost to change the car exhaust? Read Answer
    • Vari - How much does it cost to replace the muffler? Read Answer
    • Vari - How often should the particulate filter be replaced? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos