Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
If we intend to customize our car by installing a rear view camera, follow the instructions below with the help of the video images. The camera, the connection cables and the display are included in the kit purchased aftermarket. First of all, open the tailgate and release the internal plastic panel, position the camera immediately to the side of the rear number plate light, remove the tailgate opening handle, replace it with the one supplied with the kit which includes the camera. Proceed to pass the power cables along the pillar of the tailgate and pass them through the corrugated tube in order to enter the passenger compartment and slide them under the roof of the car up to the front pillar of the windscreen and from there bring the cables to the console and then on the multimedia system to which we will have to connect them in order to view the camera images.
Posted on 12 April 2023 by ScegliAuto
How to install a rear view camera with license plate holder on any car
(Various brands) Various Today we are going to install a rear view camera with license plate holder, which can be installed on any car. First we go to the back of the car and
How to properly install a rearview camera
(Various brands) Various For the installation of the camera, you will need a digital multimeter, zip ties, electrical tape, and scissors. You can find a good backup camera on
Wireless reverse camera that does not require installation cables.
(Various brands) Various This wireless backup camera can be installed by anyone in just a few minutes. The only precaution is to charge the battery before installation, as it Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |