Do it yourself
Frequently asked questions about cars and motorcycles

Wireless Reverse Camera That Requires No Installation Cables

Model: (Various brands) Various
Part: Checks and maintenance

This wireless reverse camera can be installed by anyone in just a few minutes. The only precaution is to charge the battery before installation, as it naturally arrives discharged. After that, there will be no need to worry about recharging the battery - with no electrical connections - as the battery is solar-powered and recharges with daylight. You can find it on Amazon with the code B09L17ZRNY; it costs £169.99, including delivery charges. The only cable to connect is the one from the screen to the USB socket; being very long (about 11.5 ft), it can be routed behind the dashboard, then through the glove compartment, to the centre console (if you want to do a neat job). Otherwise, it operates entirely on Wi-Fi and takes a maximum of 5 minutes to install.

Updated on 24 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

(Various brands) Various In this video, we can see how to connect a rearview camera to an Android car radio. The parts we have are: the rear camera, extension cables, power c…
(Various brands) Various In this video we can see the reasons why the rear camera of a car may not work: when we engage reverse gear, the rear camera should start working, bu…
(Various brands) Various Today, we will install a number plate reverse camera, which can be fitted to any vehicle. First, go to the back of the car and remove the number plat…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos