Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Position the Telepass Device in the Car

Model: (Various brands) Various

This tutorial shows how to install the new Telepass device in the car. Unlike the previous model, this new device has a special adhesive. First, remove the initial label from the sensor, then take the device and position it at the top of the car's windscreen. It is essential to clean the glass thoroughly before adhering the device to avoid issues with both adhesion and sensor detection. Once the glass is clean, attach the Telepass by pressing it against the glass and maintaining light pressure for a few seconds, allowing it to adhere properly to the surface.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Telepass from the Windscreen?
How to Remove the Telepass from the Windscreen?
(Various brands) Various Not everyone knows that the Telepass device can be detached from the car's windscreen. The mechanism is simple, and the video author shows us how it …
How to position the Telepass holder on a vehicle
How to position the Telepass holder on a vehicle
(Various brands) Various The installation of the telepass holder is a simple and quick operation to be carried out independently. First of all, the ideal position behind the …
How to Install the Telepass?
How to Install the Telepass?
(Various brands) Various To install the Telepass on your car, remove the double-sided adhesive film located on the back of the device support. Once this film is removed, pres…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos