Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Telepass?

Model: (Various brands) Various
Part: Checks and maintenance

To install the Telepass on your car, remove the double-sided adhesive film located on the back of the device support. Once this film is removed, press the back of the support against the upper central part of the windscreen. Apply light pressure to ensure the Telepass adheres to the inside of the windscreen. Once the device is installed, approach the barriers to allow them to lift automatically.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to position the Telepass holder on a vehicle
How to position the Telepass holder on a vehicle
(Various brands) Various The installation of the telepass holder is a simple and quick operation to be carried out independently. First of all, the ideal position behind the …
How to Remove the Telepass from the Windscreen?
How to Remove the Telepass from the Windscreen?
(Various brands) Various Not everyone knows that the Telepass device can be detached from the car's windscreen. The mechanism is simple, and the video author shows us how it …
How do you remove the Telepass from the windshield?
How do you remove the Telepass from the windshield?
(Various brands) Various In order to remove the Telepass from the car windshield, you will need to use a very thin wire, which should be inserted between the device's attachm…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos