Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Toll Tag in Your Car

Model: (Various brands) Various
Part: Checks and maintenance

Start by removing the old toll tag by carefully pulling it towards you. Next, remove any adhesive residue left on the windscreen using alcohol or a similar solvent, then dry the area. After that, apply half of the "Dual Lock" adhesive (produced by StickersLab) to the windscreen where you want to position the new toll tag, and the other half to the back of the toll tag. Once this step is complete, position the toll tag, and you will have successfully completed the replacement.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Telepass from the Windscreen?
How to Remove the Telepass from the Windscreen?
(Various brands) Various Not everyone knows that the Telepass device can be detached from the car's windscreen. The mechanism is simple, and the video author shows us how it …
Brief Guide to the Operation of the New Telepass Device
Brief Guide to the Operation of the New Telepass Device
(Various brands) Various With the help of this short video tutorial, we will explain how the new "pay per use" Telepass device works. The Telepass system, as we know, allows …
How to Position the Telepass Device in the Car
How to Position the Telepass Device in the Car
(Various brands) Various This tutorial shows how to install the new Telepass device in the car. Unlike the previous model, this new device has a special adhesive. First, remo…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos