Do it yourself
Frequently asked questions about cars and motorcycles

How to Restore a Damaged Thread on Your Vehicle

Model: (Various brands) Various

A damaged thread can be temporarily restored using several methods. The first method involves inserting a piece of bare copper wire and screwing in the bolt; the copper will then bend and fill the gaps left by the damaged thread. The second method is to use thread lock or cold welding putty. This method is only used if the thread is not subjected to high loads. To permanently restore the thread, you can use three methods. The first is to drill out the old thread and create a new thread of a larger size. The second is to drill the thread and insert a threaded insert. The third is to apply epoxy resin adhesive and create a new thread.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Replacing a fuse is a simple and quick operation to be carried out independently, but it is important to take precautions beforehand. Before replacin…
(Various brands) Various After replacing the car battery, it is necessary to reset the car radio. Today we will explain how to perform this operation on Dacia and Renault veh…
(Various brands) Various (2007-2024 / ) In today's article, we will see how to reset the service light of the Abarth 595 in case it remains on even after having performed the service. To re…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos