Do it yourself
| ||||
|
Kia tire repair kit guide
Model: Kia KIA Various
In this video, we see how to use the Kia tire repair kit: this replaces the spare wheel in case of a punctured tire, and with this, it is not necessary to use the jack. The hole should not be larger than 4 mm and should not affect the sidewall of the tire. We pull over the car in a safe place and turn on the hazard lights. The kit is located under the trunk cover and consists of the compressor and the sealant container: on the back of the compressor, there is a cable to connect to the 12-volt socket inside the car. We connect the compressor cable to the tire valve, and the hose to the sealant canister, then we take the extension cord and plug it into the power outlet. We start it for 5/7 minutes: if it doesn't inflate within this time frame, it means that the hole is too big to be repaired with this technique. When it reaches the desired pressure, disconnect the compressor and close the valve. Drive at 80 km/h for about 10 minutes and then check the pressure again. Go to an authorized repair shop as soon as possible. You can drive a maximum of about 200 km with the tire repaired using this system, and never exceed 80 km/h.
Posted on 23 October 2023 by ScegliAuto
How the Kia tire monitoring system works
Kia KIA Various The Tire Pressure Monitoring System - or TMPS - works by notifying you when one or more tires significantly lose their reference pressure. When this
How to check the tire pressure of our Kia car
Kia KIA Various In this video we see how and why to check the tire pressure of our Kia car: we remind you that this is an operation that should always be done with c
How do I reset the tire pressure warning light on my Kia Sportage?
Kia KIA Various There is no real procedure to carry out to reset the tire pressure warning light on your Kia Sportage, but it will turn off automatically once they h Other guides that may interest you
|
Where is the battery located in the Renault Master van?In this video, we can see where the battery is located in the Renault Master van, useful in case we need to replace it. As shown, the battery is not located in the classic engine compartment housing but is instead inside the cabin, precisely under the access step to the driver's cabin. To access it, it will be sufficient to remove the latter by removing all the relevant fixing screws. To remove the battery, it will be enough to unscrew the bolt of the lower bracket and, starting from the negative, disconnect both terminals. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |