Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this video we can see how to change the gearbox oil of a Fiat with a MultiJet engine: the vehicle in question had already covered over 150,000 kilometers. We need to look for the screw that allows us to drain the oil, using a 10 mm hex key. Let the oil drain (to tell the truth, the real drain plug is not the one we see in the video, but it is the one located behind and lower down. Before proceeding with the work, make sure to unscrew the fill plug first and then the drain plug. If you do it the other way around, you risk running out of oil, and if the fill plug doesn't unscrew! The necessary oil is a Motul 75W85 and is introduced using a Beta syringe of 500 ml in a two-liter package, but in reality, about 1.60 liters are needed.
Posted on 31 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.104
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |