Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What excess AdBlue produces on the bodywork

Model: (Various brands) Various
Part: AdBlue warning light

We must be very careful when topping up the AdBlue, because while it is true that keeping the tank too empty causes the urea to crystallize inside (meaning that the excess air inside promotes crystallization), it is also true that letting the urea come out of the cap, causing it to fall on the bodywork, causes not permanent damage but still an unpleasant residue that sticks to the bodywork. In fact, in the video, we see the residue of a top-up that has leaked from the cap, and has stained the entire side of the car, up to the tires. When it drips, we don't notice it because it is transparent, but then it crystallizes, so we must remove it immediately with a cloth and a little water: perhaps it doesn't damage the bodywork, but it is really unsightly to see.

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove excess fabric from the car seat
How to remove excess fabric from the car seat
(Various brands) Various After a few years, the seats of our car start to show some excess fabric due to continuous rubbing on the seat from bags, suitcases, shopping bags, p…
When to Use Additive for AdBlue
When to Use Additive for AdBlue
(Various brands) Various It may seem absurd to use an additive for an additive, but in certain climatic conditions, especially during summer, AdBlue tends to clog the injecto…
What to Do When the AdBlue Warning Light Comes On?
What to Do When the AdBlue Warning Light Comes On?
(Various brands) Various What to do when the AdBlue warning light comes on? When the AdBlue light illuminates and starts flashing, it means that the fluid in the designated r…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos