Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

Topping up AdBlue, the additive used in all modern diesel vehicles, is not a daunting task. In fact, it is such a straightforward operation that anyone can do it. In most cases, the AdBlue fill neck is located right next to the diesel fill neck and is distinguished by a blue cap. Topping up AdBlue is done exactly like refuelling.

At a service station, open the flap, remove the cap, and insert the pump into the fill neck. You can also top up AdBlue outside of service stations by purchasing containers of the additive.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

What to Do When the AdBlue Warning Light Comes On?
What to Do When the AdBlue Warning Light Comes On?
(Various brands) Various What to do when the AdBlue warning light comes on? When the AdBlue light illuminates and starts flashing, it means that the fluid in the designated r…
How to Reset the AdBlue Warning Light
How to Reset the AdBlue Warning Light
(Various brands) Various To reset the AdBlue warning light when it is flashing, accompanied by an audible signal and a message indicating that the remaining driving range is …
How to Check the AdBlue Level in the Discovery Sport
How to Check the AdBlue Level in the Discovery Sport
(Various brands) Various (2017-2023 / ) This video tutorial shows how to check the AdBlue level in the Land Rover Discovery Sport and how to top up the AdBlue tank. To view the AdBlue level…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos