Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light

Model: (Various brands) Various
Part: AdBlue warning light

Video tutorial

To reset the AdBlue warning light when it is flashing, accompanied by an audible signal and a message indicating that the remaining driving range is less than 62 miles, you must top up the AdBlue to avoid being unable to start the engine. If it is flashing with an audible signal and a message indicating that the engine cannot be started, the AdBlue tank is empty: the engine immobilisation system required by regulations prevents the engine from starting.

To restart the engine, top up the AdBlue; it is essential to add at least 5 litres to the tank.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light with the VCDS System
How to Reset the AdBlue Warning Light with the VCDS System
(Various brands) Various To reset the AdBlue warning light using the VCDS diagnostic system, follow the instructions below and refer to the video. First, connect your PC to t…
What to Do When the AdBlue Warning Light Comes On?
What to Do When the AdBlue Warning Light Comes On?
(Various brands) Various What to do when the AdBlue warning light comes on? When the AdBlue light illuminates and starts flashing, it means that the fluid in the designated r…
How to reset the AdBlue warning light with Autel Ultra Lite?
How to reset the AdBlue warning light with Autel Ultra Lite?
(Various brands) Various Today's video tutorial will show you the steps to reset the AdBlue warning light in your car. The first step is to turn on the car's instrument panel…

    Frequently Asked Questions

    • Vari - How much does it cost to replace the AdBlue tank? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos