Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue warning light with Autel Ultra Lite?

Model: (Various brands) Various
Part: AdBlue warning light

Video tutorial

Today's video tutorial will show you the steps to reset the AdBlue warning light in your car. The first step is to turn on the car's instrument panel and connect the Autel ultra lite computer via the OBD port. The second step is to select the car model and year of production, then from the diagnostic computer settings menu, select the warning light that needs to be reset.

The third step is to select the AdBlue option to perform the reset. The fourth step is to turn off and on the instrument panel a second time to complete the reset operation and then disconnect the plug.


Posted on 6 December 2024 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light with the VCDS System
How to Reset the AdBlue Warning Light with the VCDS System
(Various brands) Various To reset the AdBlue warning light using the VCDS diagnostic system, follow the instructions below and refer to the video. First, connect your PC to t…
What to Do When the AdBlue Warning Light Comes On?
What to Do When the AdBlue Warning Light Comes On?
(Various brands) Various What to do when the AdBlue warning light comes on? When the AdBlue light illuminates and starts flashing, it means that the fluid in the designated r…
How to Reset the AdBlue Warning Light
How to Reset the AdBlue Warning Light
(Various brands) Various To reset the AdBlue warning light when it is flashing, accompanied by an audible signal and a message indicating that the remaining driving range is …

    Frequently Asked Questions

    • Vari - How much does it cost to replace the AdBlue tank? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos