Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light with the VCDS System

Model: (Various brands) Various
Part: AdBlue warning light

Video tutorial

To reset the AdBlue warning light using the VCDS diagnostic system, follow the instructions below and refer to the video. First, connect your PC to the OBD2 port of your vehicle.

Then, select the vehicle type and engine type, choose the reset option for the additive level from the basic settings, and press OK. Check the list of existing errors and proceed to reset them. At this point, the AdBlue warning light will also turn off on the dashboard.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light with VCDS?
How to Reset the AdBlue Warning Light with VCDS?
(Various brands) Various To reset the AdBlue warning light on a vehicle using VCDS, first connect it to the vehicle's OBD port to communicate with the control unit. The OBD p…
Why Does the AdBlue Warning Light Come On in Diesel Cars?
Why Does the AdBlue Warning Light Come On in Diesel Cars?
(Various brands) Various The red AdBlue warning light comes on when the AdBlue level in the dedicated tank is depleted. AdBlue (urea and deionised water) is injected into the…
How to Reset the AdBlue Warning Light
How to Reset the AdBlue Warning Light
(Various brands) Various To reset the AdBlue warning light when it is flashing, accompanied by an audible signal and a message indicating that the remaining driving range is …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How much does it cost to replace the AdBlue tank? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos