Volkswagen Jetta - Power window switch
Power Window Switch Volkswagen Jetta (2005-2010 / mk 5, a 5)
Power Window Switch Volkswagen Jetta (1998-2005 / a 4, mk 4)
Accelerator (1)
Cigarette lighter (1)
Airbag (2)
Alternator (4)
Speaker (5)
Shocks (3)
Antenna (1)
Air conditioning (10)
Car stereo (12)
Battery (5)
Air vents (1)
Control arm (2)
Transmission (2)
Spark plugs (2)
Glow plugs (1)
Body (7)
Glove compartment (1)
Control unit (2)
Key (33)
Timing belt (10)
V-belt (2)
Air conditioner (4)
Onboard computer (5)
Checks and maintenance (40)
Oil pan (1)
Dashboard (4)
Shifter boot (2)
CV boot (1)
Bearing (5)
Brake rotors (2)
Headlight (13)
Tail light (8)
Fog lights (2)
Diesel particulate filter (1)
Air filter (11)
Cabin air filter (8)
Diesel fuel filter (7)
Oil filter (3)
Parking brake (2)
Clutch (2)
Grille (3)
Window switch (3)
Accessory kit (6)
Light bulb (1)
Side marker bulb (1)
Headlight bulb (20)
Tail light bulb (7)
Interior dome light bulb (3)
Antifreeze coolant (4)
Instrument panel light (1)
License plate light (4)
(1)
Handle (13)
Engine (6)
Power window motor (2)
Starter motor (8)
Transmission fluid (1)
Engine oil (5)
Power steering fluid (1)
Clock (25)
Door trim panel (25)
Windshield (1)
Front bumper (9)
Rear bumper (2)
Brake pads (5)
Shift knob (2)
Pump (7)
Fuel pump (5)
Car door (4)
Push button (6)
Power window switch (2)
Instrument cluster (2)
Radiator (5)
Heater core (12)
Wheel (3)
Fuse box (134)
Seat (19)
Axle shaft (1)
Crankshaft position sensor (1)
Door lock (10)
Oxygen sensor (1)
Suspension system (1)
Side mirror (11)
Rearview mirror (4)
Warning light – error code (16)
(48)
Tire pressure warning light (10)
Service warning light (117)
Fuel cap (18)
Windshield wipers (5)
Thermostat (2)
Cylinder head (2)
Drivetrain (4)
Center console tunnel (1)
Turbocharger (1)
Windshield washer nozzle (1)
EGR valve (1)
Blower motor (4)
Side window (2)
Steering wheel (2)
|
What Does the "Code 60" Message Mean in the Opel Meriva?
If the "Code 60" message has appeared on the dashboard of your Opel Meriva, it means that the passenger side window is not calibrated correctly. This issue can arise, for example, after disconnecting or replacing the battery, as the control unit for the various devices will lose the stored data. To remove the warning from the dashboard, simply turn on the ignition, fully open the window, and then close it. This procedure is also valid for the driver's window if the "Code 59" message appears.
Watch the video!
by ScegliAuto
More videos
|