Volkswagen Jetta - Window switch
Window Switch Volkswagen Jetta (2010-2018 / mk 6, a 6)
Window Switch Volkswagen Jetta (2005-2010 / mk 5, a 5)
Accelerator (1)
Cigarette lighter (1)
Airbag (2)
Alternator (4)
Speaker (5)
Shocks (3)
Antenna (1)
Air conditioning (10)
Car stereo (12)
Battery (5)
Air vents (1)
Control arm (2)
Transmission (2)
Spark plugs (2)
Glow plugs (1)
Body (7)
Glove compartment (1)
Control unit (2)
Key (33)
Timing belt (10)
V-belt (2)
Air conditioner (4)
Onboard computer (5)
Checks and maintenance (40)
Oil pan (1)
Dashboard (4)
Shifter boot (2)
CV boot (1)
Bearing (5)
Brake rotors (2)
Headlight (13)
Tail light (8)
Fog lights (2)
Diesel particulate filter (1)
Air filter (11)
Cabin air filter (8)
Diesel fuel filter (7)
Oil filter (3)
Parking brake (2)
Clutch (2)
Grille (3)
Window switch (3)
Accessory kit (6)
Light bulb (1)
Side marker bulb (1)
Headlight bulb (20)
Tail light bulb (7)
Interior dome light bulb (3)
Antifreeze coolant (4)
Instrument panel light (1)
License plate light (4)
(1)
Handle (13)
Engine (6)
Power window motor (2)
Starter motor (8)
Transmission fluid (1)
Engine oil (5)
Power steering fluid (1)
Clock (25)
Door trim panel (25)
Windshield (1)
Front bumper (9)
Rear bumper (2)
Brake pads (5)
Shift knob (2)
Pump (7)
Fuel pump (5)
Car door (4)
Push button (6)
Power window switch (2)
Instrument cluster (2)
Radiator (5)
Heater core (12)
Wheel (3)
Fuse box (134)
Seat (19)
Axle shaft (1)
Crankshaft position sensor (1)
Door lock (10)
Oxygen sensor (1)
Suspension system (1)
Side mirror (11)
Rearview mirror (4)
Warning light – error code (16)
(48)
Tire pressure warning light (10)
Service warning light (117)
Fuel cap (18)
Windshield wipers (5)
Thermostat (2)
Cylinder head (1)
Drivetrain (4)
Center console tunnel (1)
Turbocharger (1)
Windshield washer nozzle (1)
EGR valve (1)
Blower motor (4)
Side window (2)
Steering wheel (2)
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.
Watch the video!
by ScegliAuto
More videos
|