Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touareg
    4. : Light bulb

Volkswagen Touareg - Light bulb

Light Bulb Volkswagen Touareg (2010-2018 / mk 2, 7 p)

Volkswagen Touareg (2010-2018 / MK 2, 7P)
How to Replace the Headlight Bulb on the Volkswagen Touareg?
To replace the headlight bulb on the Volkswagen Touareg, open the bonnet and loosen the screws securing the headlight from the top. Once these are removed, you …Read all…
Posted on 5 August 2026 by ScegliAuto
Volkswagen Touareg (2010-2018 / MK 2, 7P)
How to Replace the Rear Bulbs on a Volkswagen Touareg?
To replace the rear bulbs, open the boot and unscrew the three screws holding the light unit in place. Remove the light unit and disconnect the electrical …Read all…
Posted on 12 July 2026 by ScegliAuto
Airbag (3) Alternator (1) Car stereo (10) Battery (23) Transmission (3) Body (1) Key (36) Air conditioner (2) Onboard computer (5) Checks and maintenance (19) Dashboard (3) Headlight (10) Tail light (2) Fog lights (1) Air filter (2) Cabin air filter (4) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (1) Accessory kit (2) Xenon headlight kit (1) Light bulb (2) Headlight bulb (6) Tail light bulb (4) Handle (4) Power window motor (1) Starter motor (7) Transmission fluid (1) Engine oil (2) Clock (9) Door trim panel (12) Front bumper (2) Rear bumper (2) Brake pads (6) Shift knob (2) Pump (2) Fuel pump (3) Instrument cluster (1) Wheel (1) Fuse box (63) Door lock (2) Side mirror (7) Rearview mirror (1) AdBlue warning light (17) Warning light – error code (8) (10) Tire pressure warning light (2) Service warning light (39) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (1) Blower motor (4) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos