Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Touareg
  6. : Rear bumper

Volkswagen Touareg - Rear bumper

Rear Bumper Volkswagen Touareg (2002-2010 / mk 1, 7 l)

Volkswagen Touareg (2002-2010 / MK 1, 7L)
Removing the Rear Bumper on the Touareg

Want to replace the rear bumper on the Touareg? Lift the tailgate and see how it comes off. Undo the screws for the lights and remove both of them, then undo …Read all…
Posted on 31 May 2026 by ScegliAuto
Volkswagen Touareg (2002-2010 / MK 1, 7L)
Removing the Rear Bumper from the Touareg

How do you remove the rear bumper from the Touareg? Lift the tailgate and see how it comes off. Undo the screws for the lights and remove both of them, then …Read all…
Posted on 30 May 2026 by ScegliAuto

Airbag (3) Alternator (1) Car stereo (10) Battery (23) Transmission (3) Body (1) Key (36) Air conditioner (2) Onboard computer (5) Checks and maintenance (19) Dashboard (3) Headlight (10) Tail light (2) Fog lights (1) Air filter (2) Cabin air filter (4) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (1) Accessory kit (2) Xenon headlight kit (1) Light bulb (2) Headlight bulb (6) Tail light bulb (4) Handle (4) Power window motor (1) Starter motor (7) Transmission fluid (1) Engine oil (2) Clock (9) Door trim panel (12) Front bumper (2) Rear bumper (2) Brake pads (6) Shift knob (2) Pump (2) Fuel pump (3) Instrument cluster (1) Wheel (1) Fuse box (63) Door lock (2) Side mirror (7) Rearview mirror (1) AdBlue warning light (17) Warning light – error code (8) (10) Tire pressure warning light (2) Service warning light (40) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (1) Blower motor (4) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos