Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on the Touareg

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Rear bumper

Want to replace the rear bumper on the Touareg? Lift the tailgate and see how it comes off. Undo the screws for the lights and remove both of them, then undo the screws located at the top of the bumper. Remove the side impact strips located next to the wheel arches. Undo the screws at the bottom of the bumper, then remove the screws at the sides of the wheel arches. Once the bumper is free from any screws or bolts, take it with your hands and pull it away from the bodywork. Secure the new rear bumper and prepare to install the screws and lights.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper from the Touareg
Removing the Rear Bumper from the Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) How do you remove the rear bumper from the Touareg? Lift the tailgate and see how it comes off. Undo the screws for the lights and remove both of the…
Removing the Bumper from a VW Touareg
Removing the Bumper from a VW Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) To remove the bumper from a Volkswagen Touareg, lift the bonnet and secure it. Raise the vehicle with a jack. Remove the fastening rivets (screws) lo…
Removing the Fog Light on VW Touareg
Removing the Fog Light on VW Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) How to remove the fog light on a VW Touareg? Let's see how to take out the front fog light. Remove the plastic cover at the bottom of the bumper to a…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos