Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Service warning light

To reset the "Service" light on a Volkswagen Jetta, start by turning on the instrument panel without starting the engine. This will activate the car's electronic systems. Next, locate the button located under the instrument panel, which you will use to access the onboard menu. By pressing this button repeatedly, you can scroll through the various available options until you reach the one related to maintenance or service intervals. Once you have found the right menu, hold down the button for a few seconds. This will allow you to display the option to reset the "Service" light. Once the option is displayed, press and hold the button again until the system confirms that the reset has been completed. The light will automatically turn off, indicating that the new maintenance interval has been properly recorded. After the process is complete, you can turn off and on the instrument panel to verify that the "Service" light is indeed off. If not, repeat the steps, making sure to correctly perform each stage of the reset.

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Volkswagen Jetta?
How to reset the "Service" light on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To reset the "Service" light on a Volkswagen Jetta, you can follow these steps. Start by pressing the buttons on the steering wheel to access the car…
How to reset the "Service" light on a Volkswagen Jetta?
Volkswagen Jetta (2018-2025 / A7, MK 7) To reset the "Service" light on a Volkswagen Jetta, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel t…
How to reset the Service light on a Volkswagen Jetta?
How to reset the Service light on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) From the instrument cluster of the Volkswagen Jetta, you can completely clear the Service light by pressing and holding the 0.0/SET button located on…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos