|
Do it yourself
| |||
| ||||
How to reset the "Service" indicator on a Volkswagen Crafter?
Model: Volkswagen Crafter
SZ, SY, MK 2
- Years 2017-2026
To reset the "Service" light on a Volkswagen Crafter, start by turning on the instrument panel without starting the engine. Once the panel is on, use the button located under the instrument panel to enter the onboard menu. By pressing this button repeatedly, scroll through the various options available in the menu until you find the one dedicated to maintenance or service intervals. Once you have selected the correct section, hold down the button for a few seconds. This will allow you to access the option to reset the "Service" light. To confirm the operation, you will need to hold down the button until the system notifies you that the reset has been completed correctly. At that point, the "Service" light will turn off, indicating that the vehicle has recorded a new maintenance interval. Finally, to ensure that the operation has been performed correctly, turn off the instrument panel and turn it back on. If the "Service" light is still on, repeat the procedure, paying attention to each step.
Posted on 28 September 2024 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Crafter
(2006-2017 /
2E, 2F, MK 1)
Good morning, today we are here to discover how to reset the "Service" light on our Volkswagen Crafter. Let's start by sitting in the driver's seat o…
Volkswagen Crafter
(2006-2017 /
2E, 2F, MK 1)
Today's instructions will allow us to reset the regular maintenance (service) reminder of the Volkswagen Crafter. First, we get on board the vehicle …
Volkswagen Crafter
(2017-2026 /
SZ, SY, MK 2)
In this tutorial, we can see how to reset the service in the Volkswagen Crafter van, an extremely simple and fast operation, to be carried out only a…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
