Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Things to Know About Replacing the Timing Belt on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Timing belt

See other generations:
Video tutorial

In this video, an expert mechanic shares some advice about changing the timing belt on a Volkswagen Golf (although this advice is generally applicable to all vehicles with rubber belts). First, remember that the belt should be changed according to both time intervals and mileage; indeed, the rubber belt deteriorates over time, regardless of the miles covered.

It is also advisable to change the water pump, located at the lower end of the belt's circulation, which is prone to noise and squeaking.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's main information will show you how and when to replace the timing belt on a Volkswagen Golf 1.4 TSI. For this type of engine, the timing belt…
Guide to replacing the timing belt of the Volkswagen Golf 1.4 TSI
Guide to replacing the timing belt of the Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will see the main instructions on how to disassemble and replace the timing belt on the Volkswagen Golf 1.4 TSI. First of all, we o…
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's guide will show you the main steps on how to remove and replace the water pump and timing belt on the Volkswagen Golf 1.8T. For simplicity an…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos