Do it yourself
Frequently asked questions about cars and motorcycles

Reset service on a Volkswagen Sharan

Model: Volkswagen Sharan 7N, MK 2 - Years 2010-2023
Part: Checks and maintenance

In this very useful video guide, we can see in a few simple steps how to reset the oil change notification on a second-generation Volkswagen Sharan, a specific model produced starting from the year 2017. So let's start by pressing and holding the button on the right of the speedometer "0.0/SET" and then turning on the vehicle's ignition in the first position, without starting the engine. Once this is done, we can see on the information display the request to perform the service reset, so we confirm the operation by pressing the "OK" button, located on the right side of the steering wheel, to complete the job.

Posted on 26 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Sharan (2010-2023 / 7N, MK 2) The Service indicator that appears on the instrument panel of the Volkswagen Sharan can be reset by holding down the 0.0/SET button located on the ri…
Volkswagen Sharan (2010-2023 / 7N, MK 2) The Service warning light that appears on the instrument panel of the Volkswagen Sharan can be reset by holding down the 0.0/SET button located on th…
Volkswagen Sharan (2010-2023 / 7N, MK 2) From the instrument panel of the Volkswagen Sharan, it will be possible to reset the Service indicator by holding down the 0.0/SET button located on …

Other guides you may be interested in

    Frequently Asked Questions

    • Sharan 2010-2023 - Where is the jack of the Volkswagen Sharan located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos