Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock in the Volkswagen Jetta?

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Clock

To adjust the clock of the Volkswagen Jetta, it will be necessary to turn on the instrument panel, so that it is then possible to use the button located below the tachometer and near the screen with the clock. This button must be rotated clockwise to change the minutes; once the minutes have been changed, it will be possible to proceed by turning the button counterclockwise to change the hours. Once the clock adjustment is done, you can turn off the instrument panel to complete.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock in the Volkswagen Jetta?
How do you set the clock in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In order to set the clock of the Volkswagen Jetta, you need to turn on the instrument panel by inserting the ignition key into its slot: once the pan…
How to set the clock of the Volkswagen Jetta MK6
How to set the clock of the Volkswagen Jetta MK6
Volkswagen Jetta (2010-2018 / MK 6, A6) In this video we can see how to set the clock of the Volkswagen Jetta MK6: we will use the button located at the bottom left compared to the tachomet…
How to set the clock on the Volkswagen Jetta
How to set the clock on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) The instructions in this guide will show you how to adjust the clock on the display of the instrument cluster in the Volkswagen Jetta. First, get in …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos