Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Volkswagen Beetle?

Model: Volkswagen Maggiolino MK 1 - Years: 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Part: Headlight

See other generations:
Video tutorial

To remove the front headlamp of a Volkswagen Beetle, follow these steps. Start by removing the headlamp frame by unscrewing the securing screw that holds it in place.

Once the screw is removed, gently pull out the headlamp frame. You will then be able to access the headlamp itself.

Carefully extract the headlamp from its housing, taking care not to damage it. Once the headlamp is removed, you should see the electrical connector. Disconnect the electrical connector by gently pulling it. At this point, the headlamp will be completely separated from the vehicle, and you can proceed with any necessary repairs or replacements.

Ensure to keep all parts safe and reassemble the headlamp by following the same procedure in reverse order.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of a Volkswagen Beetle?
How to Remove the Front Headlamp of a Volkswagen Beetle?
Volkswagen Maggiolino (2011-2019 / MK 2) To remove the front headlamp of a Volkswagen Beetle, start by opening the bonnet to access the back of the headlamp. Locate the spring clip or fixing…
How to Remove the Steering Wheel from a Volkswagen Beetle?
How to Remove the Steering Wheel from a Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) To remove the steering wheel from a Volkswagen Beetle, start by dislodging and removing the horn button, usually located at the centre of the steerin…
How to Remove the Steering Wheel from a Volkswagen Beetle?
How to Remove the Steering Wheel from a Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) To remove the steering wheel from a Volkswagen Beetle, start by disconnecting the negative terminal of the battery to avoid short circuits, as the st…

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos