Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator of the 2012 Volkswagen Amarok

Model: Volkswagen Amarok MK 1 - Years 2010-2021
Part: Service warning light

To complete the manual reset procedure of the service light on your first series Volkswagen Amarok (2012), you only need a few seconds. All you have to do is follow the steps described in the following guide dedicated to you. First, you need to reach the driver's seat inside the vehicle, then turn on the instrument panel and hold down the "0.0/Set" button located below the display for a few seconds. Then release the button and press the button to its left once. Finally, turn off the instrument panel.

Posted on 25 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Volkswagen Amarok?
How do you reset the Service light on the Volkswagen Amarok?
Volkswagen Amarok (2010-2021 / MK 1) To reset the Service light that is shown on the instrument panel of the Volkswagen Amarok, you will need to press and hold the button located on the …
How to restore the service light on the Amarok
How to restore the service light on the Amarok
Volkswagen Amarok (2010-2021 / MK 1) In this article, we will explain how to reset the service light on the Volkswagen Amarok. This procedure is useful in case the light remains on even …
How to Reset the Service Light on the Volkswagen Amarok?
How to Reset the Service Light on the Volkswagen Amarok?
Volkswagen Amarok (2010-2021 / MK 1) To reset the Service light on the Volkswagen Amarok, press and hold the 0.0/SET button located on the right side of the instrument panel while it is …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos