Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service indicator of the Volkswagen Amarok

Model: Volkswagen Amarok MK 2 - Years 2022-2026
Part: Service warning light

To manually reset the service light of your second generation Volkswagen Amarok, you must follow the steps described in the following guide. First of all, get into the car and insert the key, then start the instrument panel. Once you have done this, locate the button below the speedometer and hold it down for a few seconds. Then confirm the reset of the light by pressing the "OK" button located on the right side of the steering wheel, and the procedure is successfully completed. In case of errors during the procedure, do not worry because you just need to turn off and on the car to repeat it from the beginning.

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Amarok (2022-2026 / MK 2) To correctly perform the manual reset of the service light on your second-generation Volkswagen Amarok, follow the steps described in this new guide.…
Volkswagen Amarok (2010-2021 / MK 1) To complete the manual reset procedure of the service light on your first series Volkswagen Amarok (2012), you only need a few seconds. All you have …
Volkswagen Amarok (2022-2026 / MK 2) To reset the "Service" light on a Volkswagen Amarok, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos