Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove a Volkswagen car radio from its housing

Model: Volkswagen Volkswagen Various
Part: Car stereo

In this video, we see how to remove an original car radio from a Volkswagen: first, we need to remove the plastic cover located on the top of the dashboard, in order to then remove the screws that secure the air vents. Once these are removed, we can remove the frame surrounding the radio device, using a plastic spatula to avoid damaging the bodywork. After this, we will find the four screws that secure the radio to the bodywork: unscrew them and we can remove the radio device, disconnecting the connectors at the back, and being careful not to pull on the wiring.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Volkswagen car radio?
How do you reset the Volkswagen car radio?
Volkswagen Volkswagen Various To reset the Volkswagen car radio, you will need to remove the device from its housing: to do this, you can use a tool to pry off the central dashboa…
How do you reset the Volkswagen RNS510 car radio?
How do you reset the Volkswagen RNS510 car radio?
Volkswagen Volkswagen Various To reset the Volkswagen RNS510 car radio, you need to remove the device so that it can be taken out of its housing: to do this, you will need to loos…
How to replace the Volkswagen car radio
How to replace the Volkswagen car radio
Volkswagen Volkswagen Various Replacing a non-functioning car radio on a Volkswagen vehicle is a very simple operation to perform independently. To begin the replacement, we need …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos