Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlights of the Volkswagen Golf 7?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Tail light

In this video we will see how to disassemble the rear lights of the Volkswagen Golf 7, not because they are damaged or there is any other problem that requires replacement, but simply because we want to install a type of latest generation LED optical group. We follow the work: with the trunk open, we will have to look for the slot prepared in the side lining carpet, open it, insert our hand and unscrew the plastic pin that holds the light locked. After this, we push it outwards and disconnect the connector that supplies it electrically. Job done.

Posted on 30 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Headlights on a Volkswagen Golf
How to Adjust the Headlights on a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) This guide shows how to adjust the height of the headlights on a Volkswagen Golf. First, get in the vehicle and make an initial adjustment to the hea…
How to Turn on the Headlights of a Volkswagen Golf 7
How to Turn on the Headlights of a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today, we will explain how to turn on the front headlights of a Volkswagen Golf 7. To turn on the headlights, first start the vehicle. Next, rotate t…
Adjusting the Headlights on a Volkswagen Golf
Adjusting the Headlights on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the steps to adjust the front headlights on a Volkswagen Golf. First, get in the vehicle and start the engine, then switch on the lights; i…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos