Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to adjust the headlights on Volkswagen Golf 6

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf 5K1, MK 6, Golf 6, Golf VI - Years 2008-2012
Part: Headlight
Operation: How to adjust the headlights on Volkswagen Golf 6

Thanks to this very short video guide, we can see how to adjust the height of the headlights on a sixth generation Volkswagen Golf, model produced from 2008 to 2016. To adjust the headlights without electronic control, we have to open the bonnet and look for the adjustment screws positioned behind the headlights as shown in the video tutorial, once found, using a 6mm Allen key, start turning them clockwise or counterclockwise to lower or raise the low beam of the headlights until to obtain the desired setting.


Posted on 13 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Golf 2019-2026 - How do you adjust the headlights of the Volkswagen Golf 8? Read Answer
    • Golf 2008-2012 - Why doesn't the low beam on the Volkswagen Golf work? Read Answer
    • Golf 2008-2012 - How to remove a Golf 6 headlight? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos