Do it yourself
Frequently asked questions about cars and motorcycles

How to repair or replace the turn signal switch of the Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003

In this guide we will see how to disassemble and replace (or possibly repair) the turn signal switch of the Volkswagen Golf. First of all, we get into the car and start pulling the turn signal switch towards us to detach it and remove it from the dashboard, disconnecting the electrical connector found on the back; then we repair the contacts or directly replace the entire component, as shown in the video. We make the electrical connection and insert the turn signal switch on the dashboard, checking the correct operation of all the lights!

Posted on 29 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the side light bulb on a Volkswagen Golf 4, remove the side light unit from its housing by pulling it out from inside the car. Once remove…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This guide briefly outlines the instructions to remove and replace the side indicator bulb of the external mirror of the Volkswagen Golf. First, remo…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Follow these instructions to remove and replace the indicator bulb in the external wing mirror of the Volkswagen Golf. First, move to the outside and…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos