Do it yourself
Frequently asked questions about cars and motorcycles

Diagram and positioning of the fuses of the Volkswagen Caddy

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

Today in this guide we will discover information about the positioning and the fuse layout of the Volkswagen Caddy. First, we open the vehicle's engine hood and start removing the plastic cover located on the top right, thus accessing the external fuses; we instead find the external fuse box on the driver's side, removing the plastic cover located next to the steering wheel on the dashboard, as shown in the video.

At this point, we use the diagram provided in the vehicle's owner's manual to find all the codes and amperages of the fuses!


Posted on 25 July 2025 by ScegliAuto


Related tutorials

Volkswagen Caddy (2003-2020 / 2K, MK 3) Today we will discover information regarding the layout and positioning of the internal fuse box of the Volkswagen Caddy. First, we open the front do…
Volkswagen Caddy (2003-2020 / 2K, MK 3) Today's instructions will show you the location of the internal fuse box and how to find the fuse diagram for the Volkswagen Caddy. First, get inside…
Volkswagen Caddy (2003-2020 / 2K, MK 3) Today's main instructions will show us the positioning of the various fuse boxes and how to find their diagram for the Volkswagen Caddy. First, we ge…

Other guides you may be interested in

    Frequently Asked Questions

    • Caddy 2003-2020 - Where is the windshield washer pump fuse located in the Caddy? Read answer
    • Caddy 2003-2020 - Where is the Volkswagen Caddy central locking fuse located? Read answer

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos