Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the panoramic roof control panel of the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016

In this guide we will see the instructions that will allow us to disassemble the panoramic roof control panel of the Volkswagen Tiguan. First of all, we get on board the cabin and start removing the plastic partition of the interior lights' overhead console; we lever on it to detach and remove it, disconnecting the electrical connectors found on the inside, as shown in the video. At this point we remove if necessary the control of the panoramic sunroof, carrying out the repair or replacing it with a new one; we then reassemble the control panel.

Posted on 26 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Panoramic Roof of the Volkswagen Tiguan
How to Reset the Panoramic Roof of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today's guide will illustrate the steps to reset the mechanism of the panoramic roof in the Volkswagen Tiguan. First, get inside the vehicle and turn…
How to Adjust the Opening and Closing of the Panoramic Roof in the Volkswagen Tiguan
How to Adjust the Opening and Closing of the Panoramic Roof in the Volkswagen Tiguan
Volkswagen Tiguan (2024-2026 / MK 3) Today, I will explain how to adjust the opening and closing of the panoramic sunroof in the Volkswagen Tiguan. To perform this operation, we need to …
Replacement of the panoramic sunroof blind of the Volkswagen Tiguan
Replacement of the panoramic sunroof blind of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Following these simple steps, we will see how to disassemble and replace the sunshade of the panoramic roof of the Volkswagen Tiguan. First of all, w…

How to Reset the EDC Light on an Iveco Eurocargo

The engine light on an industrial vehicle like the Iveco Eurocargo must not be ignored. An engine fault on a heavy vehicle can cause serious damage to itself and others. After servicing, you can reset the EDC light, which is equivalent to an engine light, using the following method. Get into the vehicle, close the doors, and turn on the ignition: press the "call" button on the right side of the steering wheel once, then press the "down" button on the left side of the steering wheel twice. Now press the "menu" button on the right side of the steering wheel (below the phone button) and the "plus" button on the left side of the steering wheel. Now press "Ok" (still on the "call" button) and the light will turn off. Turn off the ignition and turn it back on to verify.

Watch the video!


by ScegliAuto

More videos