Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window regulator mechanism of the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

Today's main instructions will show us how to disassemble and replace the window mechanism of the Volkswagen Polo. First, we open the front door of the car and start disassembling and removing the door panel; then we remove the partition of the window mechanism, unscrewing all the fixing screws and disconnecting the side window from the mechanism, as shown in the video.

At this point, we carry out the repair or replacement of the window mechanism, reassembling all the other components in order, following the video tutorial until the end!


Posted on 8 October 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Window Regulator Handle and Mechanism on a Volkswagen Polo
How to Remove the Rear Window Regulator Handle and Mechanism on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Here are the main instructions on how to remove and replace the rear window regulator handle and mechanism on a Volkswagen Polo. First, open the rear…
How to Replace the Front Window Regulator Mechanism on the Volkswagen Polo
How to Replace the Front Window Regulator Mechanism on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, we will go through the main steps to remove and replace the front window regulator mechanism on the Volkswagen Polo. First, open the f…
How to Replace the Window Regulator on a Volkswagen Polo?
How to Replace the Window Regulator on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the window regulator on a Volkswagen Polo, loosen the screws that secure the door panel to its housing: the fixing screws for the panel ar…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos