Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service indicator light on the Volkswagen Amarok?

Model: Volkswagen Amarok MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

You can completely delete the Service indicator that appears on the display of the Volkswagen Amarok by holding down the 0.0/SET button located in the lower center of the instrument panel, while the ignition is off: continue holding down this button, it will be possible to insert the ignition key into the corresponding slot and turn on the instrument panel.

In this way, a confirmation message will be shown asking if you really want to delete the maintenance interval: by pressing the OK button on the right side of the steering wheel, you can reset the indicator and then turn off the display.


Posted on 11 October 2025 by ScegliAuto


Related tutorials

Volkswagen Amarok (2010-2021 / MK 1) To reset the Service light on the Volkswagen Amarok, press and hold the 0.0/SET button located at the bottom centre of the instrument cluster while i…
Volkswagen Amarok (2010-2021 / MK 1) From the instrument panel of the Volkswagen Amarok, you can reset the Service light by holding down the 0.0/SET button located in the central lower p…
Volkswagen Amarok (2010-2021 / MK 1) To reset the Service light that is shown on the instrument panel of the Volkswagen Amarok, you will need to press and hold the button located on the …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos