Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Clock

See other generations:
Video tutorial

It will be possible to adjust the clock of the Volkswagen Jetta by turning on the instrument panel: once it has been activated, you can use the buttons located on the sides to modify the settings on the onboard computer. By pressing and holding the button on the left side of the panel, you can check that the hours will start flashing and can be adjusted by pressing the button on the right.

Pressing the left button again, you will see that the minutes will start flashing, which can be adjusted in the same way.


Posted on 13 October 2025 by ScegliAuto


Related tutorials

How to Set the Clock on a Volkswagen Jetta?
How to Set the Clock on a Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) To adjust the clock on a Volkswagen Jetta, turn on the instrument panel to use the button located under the rev counter and near the clock display. R…
How to Set the Clock on a Volkswagen Jetta?
How to Set the Clock on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To set the clock on a Volkswagen Jetta, turn on the ignition by inserting the key into the ignition barrel. Once the dashboard is illuminated, press …
How to Set the Clock on a Volkswagen Jetta?
How to Set the Clock on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To adjust the clock on the Volkswagen Jetta, first turn on the ignition by inserting the key into the ignition switch. Once the instrument panel is i…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos