Do it yourself
Frequently asked questions about cars and motorcycles

Fuse box diagram of a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Fuse box

In today's video tutorial, we will see all the diagrams, including the name, position, and operating amperage, of the fuse boxes and relays inside a Volkswagen Golf, sixth generation model produced from 2008 to 2012. The first fuse box shown is located inside the engine compartment on the left, while the second fuse box can be found on the left side of the dashboard behind a plastic panel that needs to be removed. There is also a third relay box located inside the dashboard, accessible by removing a small plastic panel.

Posted on 14 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This guide provides instructions regarding the positioning and diagram of the internal fuse box for the Volkswagen Golf. First, open the driver's sid…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) This brief overview provides information on the positioning and diagram of the internal fuse box for the Volkswagen Golf. First, open the driver's si…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's guide will show us the layout and positioning of the external fuse box of the Volkswagen Golf. First, we open the hood of the car by pulling …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 1997-2003 - Where are the cigarette lighter fuses located in the Volkswagen Golf IV? Read answer
    • Golf 2012-2019 - Where is the Volkswagen Golf 7 Start & Stop fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - What is the Volkswagen Golf Mk5 wiper fuse? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer
    • Golf 2003-2008 - Where is the VW Golf 5 radiator fan fuse located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos