Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuse for the interior light of the Volkswagen Golf located?

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Fuse box

Video tutorial
Detailed instructions - The interior light fuse of the Volkswagen Golf mk4 model, produced from 1997 to 2004, is located inside the fuse box behind the left side dashboard panel. The fuse is labeled as F14 with a 10 Amp rating. To replace it, we need to remove the side panel and extract the damaged fuse using needle-nose pliers. After removing the fuse, we insert the new one with the same amperage. We close the box and test the light's operation by pressing the power button. If it still doesn't work, it is necessary to check the bulb connector.

Posted on 22 October 2025 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The Volkswagen Golf MK4 model has two fuse boxes inside. The fuse for the cigarette lighter socket is located inside the box located inside the passe…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The fuse related to the operation of the front fog light bulb of the Volkswagen Golf model 4 is located inside the box on the left side of the dashbo…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The central locking fuse for the Volkswagen Golf is located in the fuse box on the left side of the dashboard: to access it, remove the protective co…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Where is the Volkswagen Golf 7 Start & Stop fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - What is the Volkswagen Golf Mk5 wiper fuse? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer
    • Golf 2003-2008 - Where is the VW Golf 5 radiator fan fuse located? Read answer

How to Reset the EDC Light on an Iveco Eurocargo

The engine light on an industrial vehicle like the Iveco Eurocargo must not be ignored. An engine fault on a heavy vehicle can cause serious damage to itself and others. After servicing, you can reset the EDC light, which is equivalent to an engine light, using the following method. Get into the vehicle, close the doors, and turn on the ignition: press the "call" button on the right side of the steering wheel once, then press the "down" button on the left side of the steering wheel twice. Now press the "menu" button on the right side of the steering wheel (below the phone button) and the "plus" button on the left side of the steering wheel. Now press "Ok" (still on the "call" button) and the light will turn off. Turn off the ignition and turn it back on to verify.

Watch the video!


by ScegliAuto

More videos