Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Clock

Below we will see how to change the time on the display of the instrument panel of the Volkswagen Up, as well as the Skoda Citigo and Seat Mii. First of all, get into the car and start the instrument panel; then press and hold the "set" button on the instrument panel until you enter the clock setting (you will see the light flashing), as shown in the video. At this point, adjust the hour first and then the minutes, using the same button; wait a few seconds to exit the setting and save the changes made!

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Volkswagen Up
How to set the time on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In a few simple steps, we will see how to set the time on the display of the instrument panel of the Volkswagen Up. First of all, we get into the car…
How to set the time in the Volkswagen Up?
How to set the time in the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In this tutorial we can see how to adjust the time in the Volkswagen Up, a very simple and quick operation, to be carried out for example after disco…
How to Set the Time on a Volkswagen Up
How to Set the Time on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Follow these steps to correctly set the time on the display of the instrument cluster in a Volkswagen Up. First, get into the vehicle and turn the ig…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos