Do it yourself
Frequently asked questions about cars and motorcycles

How to reassemble the remote control of the Volkswagen ID 3/ID4/ID5.

Model: Volkswagen Id 5 MK 1 - Years: 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

What may seem like a trivial task at first glance has actually caused quite a few headaches for this YouTuber. In fact, the rubber panel has completely come off, and as we saw in the video, it doesn't simply snap back into place by pressing it. It's necessary to partially disassemble the remote control.

Using a small flathead screwdriver, we pry open the bottom of the remote, between the metal frame and the plastic shell, to pop off the metal frame; we repeat this on the other side. We take the rubber panel with the buttons, position it in its housing, ensuring it is perfectly aligned, and then take the metal frame from the longer side and snap it in place bit by bit, before repeating with the shorter side.

We insert the mechanical key back into its housing, replace the back cover, and we're done. Use a gentle hand!


Posted on 28 November 2025 by ScegliAuto


Related tutorials

Volkswagen Id 5 (2022-2026 / MK 1) Each of the fuses of the Volkswagen ID.5 is located inside one of the specific fuse boxes that are installed on the vehicle: in this type of vehicle …
Volkswagen Id 5 (2022-2026 / MK 1) If a device in our Volkswagen ID 5 has suddenly stopped working, the first thing we can do is check the status of the respective fuses, the diagrams …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos