|
Do it yourself
| |||
| ||||
Volkswagen Golf 5 and fuse number 13 (10A), diagnostics and rain sensor with position and replacement.
Model: Volkswagen Golf
MK 5, Golf 5, Golf V
- Years 2003-2008
On the Volkswagen Golf 5, access to the fuse box is achieved by removing the cover at the indicated point; locate position number 13 and the corresponding 10A fuse associated with the diagnostic functions and rain sensor. With the ignition turned off, use the extractor or tweezers to pull out the fuse in line; check the condition of the element, and if the filament is broken, replace it with one of the same amperage (10A). After closing the cover, turn the ignition to ON and check if the serviced functions (diagnostic communication and rain detection) have been restored. If the fuse continues to blow, it is advisable to check the wiring, connectors, and any relay/module connected to the circuit.
Posted on 6 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
Volkswagen Golf vehicles have two fuse boxes, even in models produced from 1997 to 2003. The fuse boxes are located inside the cabin and under the fr…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
The Volkswagen Golf 7 has two fuse boxes. The first fuse box is located under the bonnet on the left side of the vehicle. Here you can find, for exam…
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
In today's tutorial, we will go through the steps to remove and replace the outside temperature sensor on the fifth generation Volkswagen Golf and th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.298
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |