Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Volkswagen Amarok

Model: Volkswagen Amarok MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Parking brake

See other generations:
Video tutorial

Here are the instructions on how to adjust the handbrake on a Volkswagen Amarok. First, raise the vehicle and locate the handbrake cable adjustment nut next to the driveshaft.

Use a socket or spanner to tighten the nut, pulling the handbrake cable as shown in the video. Make various adjustments until you achieve the optimal result.

For the adjustment to be correct, ensure that the rear brake pads are in good condition.


Posted on 2 March 2026 by ScegliAuto


Related tutorials

How to Set the Time in a Volkswagen Amarok Pickup
How to Set the Time in a Volkswagen Amarok Pickup
Volkswagen Amarok (2010-2021 / MK 1) This tutorial shows how to set the time in a Volkswagen Amarok pickup, a very simple and quick operation, for example, after disconnecting the batter…
Where are the fuses located on a Volkswagen Amarok?
Where are the fuses located on a Volkswagen Amarok?
Volkswagen Amarok (2022-2026 / MK 2) On the Volkswagen Amarok, the fuses are contained within dedicated fuse boxes installed in the vehicle. In this type of car, you can find two boxes t…
Resetting the Engine Oil Change Light on the Volkswagen Amarok
Resetting the Engine Oil Change Light on the Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) In this guide, we will discover the instructions that will allow us to reset the engine oil change light (service) on the Volkswagen Amarok. First, g…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos