Do it yourself
Frequently asked questions about cars and motorcycles

Layout and Diagram of the Internal Fuses of a Volkswagen Polo

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003
Part: Fuse box

Let's look at the information that will allow you to access the internal fuse box of a Volkswagen Polo, including the diagram and layout. First, get inside the cabin and start removing the plastic cover found at the bottom left, driver's side, thus accessing the internal fuses; usually, the cover contains the fuse diagram, which can also be found in the vehicle's user manual. The tables shown in the video contain the diagrams associated with the codes and amperages, ensuring to respect the ampere rating when replacing fuses.

Posted on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Below are the details that will allow us to access the internal fuse box of the Volkswagen Polo, along with the diagram and layout. First, open the d…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Briefly, we will see the instructions that will allow us to access the internal fuse box of the Volkswagen Polo, obtaining the diagram and layout. Fi…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Let's briefly review the information that will show us how to access the internal fuse box of the Volkswagen Polo. First, open the driver's side fron…

    Frequently Asked Questions

    • Polo 2017-2025 - What is the location of the power steering fuse on the Volkswagen Polo? Read answer
    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos