Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the light switch from a Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Push button

Today, you will see how to remove the light switch on a Volkswagen Golf model 5. To perform the removal of the switch, position it to off or to the central position indicating zero. Push the button inwards and then remove it by pulling firmly outwards. An important note is not to apply too much force to avoid damaging the connector. Once the connector is disconnected, you can replace the button if necessary. The malfunctioning of the lights can be attributed not only to a faulty switch but also to damaged fuses.

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Light Switch on the Volkswagen Golf
How to Replace the Light Switch on the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Here are the instructions to remove and replace the light switch or stalk switch on the Volkswagen Golf. First, get inside the vehicle and start remo…
Where is the reverse light switch located in the Volkswagen Golf?
Where is the reverse light switch located in the Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video we can see where the reverse light switch is located in the Volkswagen Golf and how to proceed in case we need to remove it, a very sim…
How to replace the light switch on a Volkswagen Golf
How to replace the light switch on a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This guide will show you the procedure for removing and replacing the light switch on a Volkswagen Golf. First, get into the vehicle on the driver's …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos