Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Light Switch from a Volkswagen Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Push button

See other generations:
Video tutorial

Today, you will remove the light switch from a Volkswagen Golf 5. Get into the cabin, and as seen in the video, to the left of the steering wheel, specifically at the bottom, you will find the switch in question. Once you have located the part to be replaced, press it inwards and turn it to the right; you will hear a click, and only then can you pull it out. Proceed with caution; even though the switch is now out of its socket, you must disconnect the power plug before you can say your work is complete.

Now, you are ready to replace it with a new part!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Remove the Indicator Stalk on a Volkswagen Golf 4
How to Remove the Indicator Stalk on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This video shows how to disassemble and replace the indicator stalk on a fourth-generation Volkswagen Golf, as well as on the Jetta, Bora, and Passat…
How to repair or replace the turn signal switch of the Volkswagen Golf
How to repair or replace the turn signal switch of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide we will see how to disassemble and replace (or possibly repair) the turn signal switch of the Volkswagen Golf. First of all, we get int…
How to Replace the Light Switch on the Volkswagen Golf
How to Replace the Light Switch on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Here are the instructions to remove and replace the light switch or stalk switch on the Volkswagen Golf. First, get inside the vehicle and start remo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos