Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Indicator Stalk on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

This video shows how to disassemble and replace the indicator stalk on a fourth-generation Volkswagen Golf, as well as on the Jetta, Bora, and Passat, in simple and quick steps. First, get inside the vehicle and take the indicator stalk, rotating it to detach it from its housing; then disconnect the electrical connector, as shown in the video.

Now replace the entire indicator switch with the new one, connecting the electrical connector and inserting it perfectly until it clicks into place!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to repair or replace the turn signal switch of the Volkswagen Golf
How to repair or replace the turn signal switch of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide we will see how to disassemble and replace (or possibly repair) the turn signal switch of the Volkswagen Golf. First of all, we get int…
Removing the Indicator Stalk from the Volkswagen Golf Mk4
Removing the Indicator Stalk from the Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This video shows how to remove the indicator stalk from the Volkswagen Golf Mk4, as well as from the Bora and Jetta. First, get inside the vehicle an…
Adjusting the Headlights on a Volkswagen Golf
Adjusting the Headlights on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below are the steps to adjust the front headlights on a Volkswagen Golf. First, get in the vehicle and start the engine, then switch on the lights; i…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos